This month an overhaul and repairs was carried out on a Cutmaster Gearbox for an Alloy Processing Customer.

Alloy metalwork production & processing

The Gearbox was collected, stripped and cleaned. A full report was sent to the customer and the following parts were changed; full set of Bearings, Set of Oil Viton Seals, Set of Fasteners, Breather, Set of Shims and Synthetic Oil.

The Stator was re-laquered.

To sleeve and machine Rotor Bearing Housing. To also manufacture and install Output Shaft, Output bearing Housing, Front Gearbox Cover Plate, Inner Bearing Housing Cover Plate, 41 Tooth Pinion and 68 Tooth Gear Wheel.